It is the good quality and complete after service of laser pointer

 It is the good quality and complete after service of laser pointer .
This system includes electronic interfaces, disk or CD-ROM, memory board, cable, or fiber optic cable and A / D converter, computer, etc.. Its main function is Feng machine imaging device to display the image information through cable and electronic interfaces, A / D converter input to the memory. Then the laser printer. The electronic interface sub-video interface, digital interface, DICOM interface. A laser camera can be connected to multiple imaging device, the output of the imaging system to select the different interface. In order to ensure the input of the multi-machine at the same time, the laser camera equipped with a hard disk image buffer into the print queue to ensure a continuous image input and image print locked for. To build up the good brand of the laser pointer industry.It is compared with the blue laser pointer and red laser pointer
Control system: The system includes a keyboard, control panel, display panels and various control keys or buttons used to control the laser printing process, increase selection, image quality control and regulation role. Signal Processing: When the laser camera power, the machine control system (MCS) on the central processing unit (CPU) and the delivery system self-test. Since elm is completed, the MCS to send the hardware reset command to the image management system (IMS) to enable IMS initialization. When the Ready light, indicating that the camera is ready, you can use. Operator to store each image stored button remote control (keyboard), and multiplexer (MMU), commands have to be sent to the image data, MMU received instructions after. The faster and better development of laser pointer needs the reasonable criticism from the customer.
Controlled by the CPU output arrangement, according to the settings of the operator, a laser camera image arrangement of the trip, zoom, and image data from digital into analog form. Light works: laser camera light source is a laser beam, the laser beam through the divergent lens system is projected onto a rotating polygonal light microscopy refraction, the refraction of the laser beam and then through a focusing lens system to print on film. Semiconductor laser wavelength of 820nm in the infrared range, it can be imaging the required data directly using a laser beam to write on transparencies; gas laser (He-Ne) the wavelength of 633nm at least connected to the laser warm-up 10rain to reach a given temperature to operate. These are the different powers of laser pointer and different prices.